The ideal choice for axial, dynamic testing of spinal implants
The ProAgility MC-Precision (MC-P) offers companies the opportunity to run axial fatigue tests for implants requiring a higher degree of load control, such as spinal implants.
ProAgility MC-Precision Features include:
- Manage testing with high precision requirements Utilizing the MC-Precision, you can manage long-term dynamic-compression feasibility testing in house. The MC-Precision delivers you a test frame ideal for high displacement applications. Electromechanical Configuration
- The MC-P runs on an electromechanical power supply - no air or hydraulic supplies are required. Since you forgo the use of hydraulic fluid and equipment, you avoid messy spills and clean-up. Minimal space required, plus quiet operation
- For many companies, space is valuable and often shared with others in the organization. The MC-P footprint is small and quiet enough for any laboratory. Up to four Test Frames can be controlled independently of one another by a single computer and controller.
What tests can I run with the ProAgility MC-Precision?
With the ProAgility MC-Precision, you can run a variety of dynamic tests requiring high displacement and lower force loads. Standard tests include dynamic, axial requirements as outlined in: ASTM F382 and ASTM F1717
Specifications
Dynamic Force - 225 pounds (1000 N) Compression
Stroke - 0-1 in. (0-25mm) Peak-Peak Displacement
Dynamic Test Frequencies - 0-25Hz
Dimensions
Footprint width - 15 in (38 cm)
Footprint depth - 30 in (76 cm)
Machine height - 48 in (122 cm)
Weight - 200 pounds (91 kilograms)
Power Requirements
Single Phase 110-220VAC, 10 Amps
