Accutek Testing Laboratory is accredited to ISO 17025 by A2LA and is accredited to SAE Aerospace Standards AC7101, AC7110, and AC7122 by Nadcap.
Our accreditations, coupled with our Quality Assurance system and calibrations performed at regular intervals, ensure the accurate and valuable testing results you require.
Below is a complete list of Accutek’s Accreditations and Certificates:
ISO/IEC 17025:2005
General Requirements for the Competence of Testing and Calibration Laboratories
Accredited by: American Association for Laboratory Accreditation (A2LA)
Certification #2422.01
Under ISO/IEC 17025:2005, Accutek is certified for a broad scope of testing. Additional certifications include:
- ASTM D3039 Tensile Properties of Polymer Matrix Composite Materials
- ASTM D3410 Compressive Properties of Polymer Matrix Composite Materials
- ASTM D3479 Tension-Tension Fatigue of Polymer Matrix Composite Materials
- ASTM D3518 In-Plane Shear Response of Polymer Matrix Composite Materials
- ASTM D7136 Damage Resistance to a Drop-Weight Impact Event
- ASTM D7137 Compressive Residual Strength of Damaged Composite Materials
- ASTM E3 Preparation
- ASTM E8 Tensile
- ASTM E18 Rockwell Hardness (Scales B, C, N, T)
- ASTM E45 Method A - Inclusion Rating
- ASTM E112 Grain Size
- ASTM E290 Bend Testing
- ASTM E340 Macro Etch
- ASTM E384 Microhardness (Knoop & Vickers)
- ASTM E407 Micro Etch
- ASTM E466 Force Controlled Constant Amplitude Axial Fatigue
- ASTM E883 Photomicrography / Light Microscopy
- ASTM E1077 Depth of Decarburization
- ASTM E1268 Banding / Orientation of Microstructure
- ASTM F382, A1, A2 Metallic Bone Plate, Single Cycle and Fatigue Bending
- ASTM F384, A1, A2 Metallic Angled Orthopedic Fracture Fixation Device
- ASTM F543 Metallic Medical Bone Screws
- ASTM F1223 Total Knee Replacement Constraint
- ASTM F1264 Intramedullary Fixation Devices
- ASTM F1717 Spinal Implant Constructs
- ASTM F1798 Interconnection Mechanisms and Subassemblies
- ASTM F1800 Tibial Tray Cyclic Fatigue Testing
- ASTM F1820 Modular Acetabular Device
- ASTM F2009 Taper Connections of Modular Prostheses
- ASTM F2028 Dynamic Evaluation of Glenoid Loosening/Disassociation
- ASTM F2077 Intervertebral Body Fusion Devices
- ASTM F2193, 1.5.4 Bending Strength of Metallic Spinal Screws
- ASTM F2267 Load Induced Subsidence of IBFD
- ASTM F2706 Occipital-Cervical & Occipital-Cervical-Thoracic Spinal Implant Constructs
- AWS B2.1, B4.0, D1.1, D1.2, D1.3, D1.6, D17.1 Weld Procedure/Performance Qualification
- ASME IX Weld Procedure/Performance Qualification
- Failure Evaluation using ASM Volume 11
- GE P3TF19/32 Alpha Case
- GE P29TF25 IGA/IGO
- GEAE E50TF133 Grain Size
- ISO 7206 Hip Stem Static and Dynamic
Nadcap
Metallic Materials Testing
In Accordance with: SAE Aerospace Standard AC7101 Certification #7874140292
- (L) Metallography (General)
- (L1) Microhardness
- (L5) Near Surface Examinations – Microhardness
- (L7) Near Surface Examinations – IGA/IGO
- (L8) Near Surface Examinations – Alpha Case: Wrought
- (L9) Near Surface Examinations – Alpha Case: Castings
In Accordance with: SAE Aerospace Standard AC7110 Certification #7874140292
- Metallurgical Evaluation of Electron Beam / Laser Welds
- Metallurgical Evaluation of Fusion Welds
- Metallurgical Evaluation of Resistance Welds
- Metallurgical Evaluation of Welder / Welding Operator Qualifications
Non-Metallic Materials Testing
In Accordance with: SAE Aerospace Standard AC7122 Certification #7874155250
- Tensile - Ambient Temperature
- Tensile - Non-ambient Temperature
- Tensile Strain Measurement
- Compression - Ambient Temperature
- Compression - Non-ambient Temperature
- Compression Strain Measurement
- Compression after Impact (CAI)
- Shear - Ambient Temperature +/- 45 Tension
- Shear - Non-ambient Temperature (any method)
- Shear Strain Measurement
GSA/FaS Schedule Contract 871-4
GE Transportation - Aviation, Special Process Certification
L (Metallography)
M (Hardness)
Pratt & Whitney Aircraft Engines 7 Metallographic Examination
AWS Certified Welding Inspector:
CWI Certificate #85050431 – John McCloy
CWI Certificate #09040731 – Justin Riebesel
CWI Certificate #12081491 – Nicholas Wood
CCR Registered Government Testing Laboratory
DUNS #786052837
Professional Engineers
Certificate # PE.54081, State of Ohio – John McCloy
Certificate # PE.76211, State of Ohio – Ryan Castells
